激光器选择(xuanze)使用交流稳压器的原因:

1、可长期连续工作，且能承受短时的超负载。激光配件主要包括激光机上常用的部件，如激光器，激光管，激光电源，激光头，激光控制系统，激光运动系统，激光镜片等。

2、具备过压，过流等自动保护功能。

3、工作环境:温度-10℃~+40℃,相对湿度。

4、可用于任何性质负载(阻性、感性、容性)。

5、增设自动开机功能(过压跳闸后，当市电恢复至稳压范围(fàn wéi)和市电停电后又重新来电，机器均自动开机)。

6、增设双延时机构(开机延时输出、过压延时关机，免除瞬间冲击)。

7、稳压精度:±1%~±5%可调输出电压调节范围(fàn wéi):±10V4、不产生附加波形畸变，不产生相移。

8、输入电压:三相380V±25%、单相220V±25%、频率(frequency)47~60HZ2、输出电压:三相380

V、单相220V(可根据需要设定)。

9、效率≥98%，变压器(Transformer)的绝缘(insulated)等级达H级。

10、响应时间。激光配件工作时，先由激光发射二极管对准目标发射激光脉冲。经目标反射后激光向各方向散射。部分散射光返回到传感器接收器，被光学系统接收后成像到雪崩光电二极管上。雪崩光电二极管是一种内部具有放大功能的光学传感器，因此它能检测极其微弱的光信号，并将其转化为相应的电信号。激光配件主要包括激光机上常用的部件，如激光器，激光管，激光电源，激光头，激光控制系统，激光运动系统，激光镜片等。

11、根据用户需要在稳压输出端可加装不同类型的自耦变压器(Transformer)或隔离变压器(Transformer)，为用户提供各种类型的稳定(wěn dìng)电压，满足不同型号机床需求。激光配件主要包括激光机上常用的部件，如激光器，激光管，激光电源，激光头，激光控制系统，激光运动系统，激光镜片等。

12、增设缺相保护功能。

The reason why lasers use AC voltage stabilizer is:

1. It can work continuously for a long time and can withstand short time overload. Laser accessories mainly include laser, laser tube, laser power supply, laser head, laser control system, laser motion system, laser lens and so on.

2, with overvoltage, overcurrent and other automatic protection functions.

3, working environment: -10 ~+40 C, relative humidity.

4. It can be applied to any kind of load (resistive, inductive, capacitive).

5. Adding automatic start-up function (after over-voltage tripping, when the city power is restored to the range of voltage stabilization (f n w i) and the city power is cut off and then calls again, the machine will start automatically).

6, add double delay mechanism (startup delay output, overvoltage delay shutdown, avoid instant impact).

7. Voltage stabilization accuracy: +1%~5% adjustable output voltage regulation range (f n w i): +10V4, no additional waveform distortion, no phase shift.

8. Input voltage: three-phase 380V+25%, single-phase 220V+25%, frequency 47~60HZ2, output voltage: three-phase 380

V, single-phase 220V (set according to need).

9, the efficiency is more than 98%, and the insulation (insulated) level of transformer (Transformer) is H.

10, response time. When laser accessories work, laser emitting diodes are used to transmit laser pulses to the target. After the target is reflected, the laser scatters in all directions. Part of the scattered light returns to the sensor receiver and is received by the optical system and then imaged onto the avalanche photodiode. Avalanche photodiode is an optical sensor with internal amplification function, so it can detect extremely weak optical signals and convert them into corresponding electrical signals. Laser accessories mainly include laser, laser tube, laser power supply, laser head, laser control system, laser motion system, laser lens and so on.

11. Various types of transformers or transformers can be installed at the output of the regulator according to the user's needs, providing users with various types of stable (wn dng) voltage to meet the needs of different types of machine tools. Laser accessories mainly include laser, laser tube, laser power supply, laser head, laser control system, laser motion system, laser lens and so on.

12, add the function of missing phase protection.

聊城经济开发区杰刻激光设备有限公司